Viscoduo/Teaha Dispenser Valve or Micro Pump of 3D Printing

• Drive Motor: Servo /Panasonic/Brushless Motor
• Form: Quantitative/ Linkage
• Operating Viscosity: 1~500000cps
• Motor Speed: 1~200rpm/Min
• Drive Voltage: 220V/380V
• Glue Ratio: 1:1-10:1
• Model NO.: micro screw pump
• Small Amount of Glue: 0.001ml
• Inlet Diameter: G1/8
• Inner Diameter: 2mm
• Weight: Valve:0.3-0.9kg Controller:3kg
• Transport Package: Packed in Fumigated Wooden Cases
• Trademark: Ronice
• Origin: Wuhan
• HS Code: 841360
• Production Capacity: 2000pieces/Year

Product Description

Product description
Double-liquid screw valve is different from single liquid screw valve,The two-component dispensing screw valve is developed for the dispensing and filling process of electronic industry. It  is mainly used to control the mixing proportion of two-component liquid. Users can control the flow of conveying medium  according to the rotating speed of the motor, and make a certain percentage of the difference.
The two mediums will be evenly stirred in the mixing pipe at the discharge end to avoid the solidification of the mixing  glue in the pump. Taking the place of traditional pneumatic dispensing valve,  the two-component dispensing screw pump can be directly installed on the mechanical arm of the equipment,  which saves space and cost of the automatic equipment.

Advantage Description
1.The quartlaiie comeying acaurecy is exiremely high, and the mnimum quanttatrve o acuracy is within 1%)
2. constani and has no puisatian (repettion accuracy is above 99% not affected by the change of medium viscosity, temperature and pressure and other parameters.
3. It is satable for procise and quaniilalive transportation of various high viscosity media   and granular  media.
4. it can suck back and completely eliminate the phenomena of wire drawing and dripping
5. The conveying pressure is 16-20Bar, and the modular design is easy to use and clean.

Applicable Media
1. Al kinds of adhesives, silica gel,two-component glue, instant drying glue water-soluble glue, etc
2. Al knds of soider paste,conductive adhesive,RTV adhesive, anaerobic achesive, epoxy adhesive, polyurethane and so on.
3. All kinds of high viscosity UV glue,optical glue and so on.
4.Al kinds of coatings,auxiliaries,emulsions,viscous raw materials, paints, oils and fats, etc.

Product Appication
1.Glue dispensing for mobile phone case and mobile phone screen.
2.Conductive adhesive and shielding dispensing
3.Dispensing the speaker of mobile phone and potting the battery of mobile phone etc.

Product parameters

Model	LNRT0.75CC	LNRT1.5CC	LNMT0.5CC	LNMT0.15CC	LNMT0.25CC	LNMT0.5CC
Size	Length264mm	Length292mm	Length178mm	Length178mm	Length195mm	Length205mm
Inlet size	English straight screw G3/8	English straight screw G3/8	English straight screw G1/8	English straight screw G1/8	English straight screw G1/4	English straight screw G1/4
Outlet size	0.8MM	1.2MM	0.8MM	0.8MM	0.8MM	0.8MM
Pressure range	0-6 bar	0-6 bar	0-10 bar	0-10 bar	0-10 bar	0-10 bar
Max pressure range	0-6 bar	0-6 bar	0-20 bar	0-20 bar	0-20 bar	0-20 bar
Max output pressure	0-24 bar	0-24 bar	0-20 bar	0-20 bar	0-20 bar	0-20 bar
Viscosity range	0-500000CPS	0-500000CPS	0-500000CPS	0-500000CPS	0-500000CPS	0-500000CPS
Flowing part	SUS304	SUS304	Aviation Aluminium	Aviation Aluminium	Aviation Aluminium	Aviation Aluminium
Sealing form	Shaft seal	Shaft seal	Shaft seal	Shaft seal	Shaft seal	Shaft seal
Static sealing ring	FKM or PTFE	FKM or PTFE	FKM or PTFE	FKM or PTFE	FKM or PTFE	FKM or PTFE
Speed range reference	0-200Rpm/min	0-200Rpm/min	0-120Rpm/min	0-120Rpm/min	0-120Rpm/min	0-120Rpm/min
Operating environment	5-40ºC	5-40ºC	5-40ºC	5-40ºC	5-40ºC	5-40ºC
Medium temperature	10-80ºC	10-80ºC	10-80ºC	10-80ºC	10-80ºC	10-80ºC
Storage conditions	Dry/dust-free	Dry/dust-free	Dry/dust-free	Dry/dust-free	Dry/dust-free	Dry/dust-free
Mixing ratio range	1:1~1:1.5	1:1~1:1.5	1:1~1:10	1:1~1:10	1:1~1:10	1:1~1:10
Each rotation is about	1.5ml	3.0ml	0.1ml	0.3ml	0.5ml	0.9ml
Repeatability	-1%~+1%	-1%~+1%	-1%~+1%	-1%~+1%	-1%~+1%	-1%~+1%
The min dose	0.4ml	1.0ml	0.02ml	0.08ml	0.16ml	0.3ml
Flow range(H)	3.0-18.0L	6.0-36.0L	3.3-12.0ml	9.9-36.0ml	16.5-60.0ml	33-120.0ml
Min starting torque	Over3.5N.m	Over 0.8N.m	Over 0.8N.m	Over 0.8N.m	Over 1.2N.m	Over 1.2N.m

Wuhan RoNice Pumps Device Co., Ltd. (RoNice) is located in Wuhan, a famous city for the good name of nine-province thoroughfare. RoNice is a well-known diversified enterprise integrating research, development, production, sales and service in central China. Now, the company has a professional team of high-tech young talents in design and development.

The company mainly produces screw pump, sludge cutter, spiral sludge dewatering machine, dosing device, agitator, screw conveyor and other environmental protection equipment. The products can transport various acid, alkali, salt, oils, high concentration viscous, cold and hot water, corrosive and other media, widely used in: environmental sewage treatment, refuse disposal, paper printing and dyeing, food and pharmaceutical, water conservancy and hydropower, urban water supply, municipal engineering, industrial production, petroleum, chemical, shipbuilding and other fields.

With a strong production capacity and excellent technical team, the company established a complete automatic processing technology, and possesses advanced technology and formula at home and abroad to produce stator, rotor high-precision CNC processing equipment, automatic polishing and welding equipment, infrared detection and laser equipment

Our company is always in pursuit of meeting the needs of customers, making breakthroughs by innovation, gaining credibility by quality, seeking development by integrity, and realizing long-term development by service. RoNice products are sold at home and abroad. We sincerely invite colleagues from all walks of life to visit our company, and create lasting glory with us.