Ronice Double Screw Pump with a Controll Hight Precision Light Weigh Compared with Viscotech, Taeha

• Customization: Available
• Customization: OEM
• Storage Conditions: Dry/Dust-Free
• Model NO.: LNMT series
• Certification: ISO
• Flow Range: 3.0-120.0
• Model: 2K Screw/Auger Valve
• Drive Motor: Servo /Panasonic/Brushless Motor
• Transport Package: Packed in Fumigated Wooden Cases
• Trademark: Ronice
• Origin: Wuhan
• HS Code: 8413604090
• Production Capacity: 5000pieces/Year

Product Description

Description of fluid dispensing valve series product
RONICE screw dispensing valves, metering pumps, filling systems and other products, widely used in the world of consumer electronics, automotive electronics, solar energy, food, daily cosmetics, chemical, steel, paint, 3D printing and other industries.
 
Technology
The manufacture of  RONICE  micro-dispensing valve is based on the principle of infinite circulation piston, that is, the principle of screw. The screw valve can provide high precision volume conveying and can be reversed to make the material flow back, so there will be no drop on the discharging side.In order to adapt from low viscosity to high viscosity of a variety of media precision delivery, RONICE continue to improve
    
Advantage

1. To ensure the perfect uniformity of  the  starting point, corners end of the glue line

1. Output flow constant, steady
2.  The output flow is proportional to the rotational speed and is not affected by the change of viscosity, pressure and temperature of the media.
3. A good self-priming and suction function, to avoid the media dripping, drawing, dropping and other phenomena
4. Apply to all kinds of high viscosity

Applicable Medium
1 A variety of adhesives, silicone, two-component adhesive, packaging, sealant, etc.
2 All kinds of solder paste, conductive slurry, RTV gum, anaerobic rubber, epoxy resin, polyurethane, etc.
3 A variety of UV paint, paint, paint, thick paint, solvent paint, additives, suspension agent, viscous raw materials, emulsion, grease and so on

RONICE suitable for all kinds of high viscosity, shearing sensitivity, grinding media such as
1. Silicone Resin
2. Metal Slurry
3. Viscous medium (anaerobic medium)
4. Coating
5. High precision Point coating
6. Can be integrated with robots and axes

Application Industry
1 Automotive industry: engine, body, lamp, window, airbag, Cooler, tubing, ABS, ESP, sensors, such as dispensing, potting application
2 Electronics industry: All kinds of touch screen, Shell package, PCB board, components, connectors, insulators, speakers and other dispensing, potting application
3 Photovoltaic solar energy: conductive slurry delivery, wafer cutting components of rubber conveyor, junction box bonding, potting, assembly seals, etc.
 
 
Function principle
RONICE adopts spiral structure design, pressure-resistant seal, rotor and stator are self-sealing design, easy to replace.The rotor is rotated in the stator cavity to realize the conveying function. The conveying process does not produce a shearing effect on the medium, so it does not affect the dielectric properties.At the same time can be reversed by the motor, easy to achieve the media back-suction function, to ensure that the media and material clean, completely solve the media dripping, drawing problems.
Application
The best volume precision quantitative transport---widely used in various dispensing, line coating, filling, sealing application occasions
 
Scope of application
Electronics Industry /Semiconductor industry/ lcd/led /PV Solar Energy industry/Pharmaceutical Industry /biochemical industry/Laboratory/ optics and optoelectronics industry 
  
Technical Features

1.Back-suction function  

2. Suitable for all kinds of viscous media
3. Easy to clean
4. Flow is not affected by pressure change
5. Precision Measurement

Product parameters

Model	LNRT0.75CC	LNRT1.5CC	LNMT0.5CC	LNMT0.15CC	LNMT0.25CC	LNMT0.5CC
Size	Length264mm	Length292mm	Length178mm	Length178mm	Length195mm	Length205mm
Inlet size	English straight screw G3/8	English straight screw G3/8	English straight screw G1/8	English straight screw G1/8	English straight screw G1/4	English straight screw G1/4
Outlet size	0.8MM	1.2MM	0.8MM	0.8MM	0.8MM	0.8MM
Pressure range	0-6 bar	0-6 bar	0-10 bar	0-10 bar	0-10 bar	0-10 bar
Max pressure range	0-6 bar	0-6 bar	0-20 bar	0-20 bar	0-20 bar	0-20 bar
Max output pressure	0-24 bar	0-24 bar	0-20 bar	0-20 bar	0-20 bar	0-20 bar
Viscosity range	0-500000CPS	0-500000CPS	0-500000CPS	0-500000CPS	0-500000CPS	0-500000CPS
Flowing part	SUS304	SUS304	Aviation Aluminium	Aviation Aluminium	Aviation Aluminium	Aviation Aluminium
Sealing form	Shaft seal	Shaft seal	Shaft seal	Shaft seal	Shaft seal	Shaft seal
Static sealing ring	FKM or PTFE	FKM or PTFE	FKM or PTFE	FKM or PTFE	FKM or PTFE	FKM or PTFE
Speed range reference	0-200Rpm/min	0-200Rpm/min	0-120Rpm/min	0-120Rpm/min	0-120Rpm/min	0-120Rpm/min
Operating environment	5-40ºC	5-40ºC	5-40ºC	5-40ºC	5-40ºC	5-40ºC
Medium temperature	10-80ºC	10-80ºC	10-80ºC	10-80ºC	10-80ºC	10-80ºC
Storage conditions	Dry/dust-free	Dry/dust-free	Dry/dust-free	Dry/dust-free	Dry/dust-free	Dry/dust-free
Mixing ratio range	1:1~1:1.5	1:1~1:1.5	1:1~1:10	1:1~1:10	1:1~1:10	1:1~1:10
Each rotation is about	1.5ml	3.0ml	0.1ml	0.3ml	0.5ml	0.9ml
Repeatability	-1%~+1%	-1%~+1%	-1%~+1%	-1%~+1%	-1%~+1%	-1%~+1%
The min dose	0.4ml	1.0ml	0.02ml	0.08ml	0.16ml	0.3ml
Flow range(H)	3.0-18.0L	6.0-36.0L	3.3-12.0ml	9.9-36.0ml	16.5-60.0ml	33-120.0ml
Min starting torque	Over3.5N.m	Over 0.8N.m	Over 0.8N.m	Over 0.8N.m	Over 1.2N.m	Over 1.2N.m

Model	2k Screw/Auger Valve
Drive motor	Servo /Panasonic/Brushless motor
Form	Quantitative/Linkage
Operating viscosity	1~500000cps
Motor speed	1~200Rpm/min
Drive voltage	220V/380v
Glue ratio	1:1-10:1
Small amount of glue	0.001ml
Inlet diameter	G1/8
Inner diameter	2MM
Weight	Valve:0.3-0.9KG   Controller:3kg

Enterprise profile

Wuhan RoNice Pumps Device Co., Ltd. (RoNice) is located in Wuhan, a famous city for the good name of nine-province thoroughfare. RoNice is a well-known diversified enterprise integrating research, development, production, sales and service in central China. Now, the company has a professional team of high-tech young talents in design and development.

The company mainly produces screw pump, sludge cutter, spiral sludge dewatering machine, dosing device, agitator, screw conveyor and other environmental protection equipment. The products can transport various acid, alkali, salt, oils, high concentration viscous, cold and hot water, corrosive and other media, widely used in: environmental sewage treatment, refuse disposal, paper printing and dyeing, food and pharmaceutical, water conservancy and hydropower, urban water supply, municipal engineering, industrial production, petroleum, chemical, shipbuilding and other fields.

With a strong production capacity and excellent technical team, the company established a complete automatic processing technology, and possesses advanced technology and formula at home and abroad to produce stator, rotor high-precision CNC processing equipment, automatic polishing and welding equipment, infrared detection and laser equipment

Our company is always in pursuit of meeting the needs of customers, making breakthroughs by innovation, gaining credibility by quality, seeking development by integrity, and realizing long-term development by service. RoNice products are sold at home and abroad. We sincerely invite colleagues from all walks of life to visit our company, and create lasting glory with us.
FAQ

1.What products does Ronice offer? 
(1) Ronice offers screw pump, Screw pump accessories, Screw valve and the  fluid system product.
(2) The product range summary of Ronice
Progressive cavity pumps for conveying and metering low to highly viscous media with or without solids
Control systems for monitoring, regulating and controlling processes
Services: consulting, commissioning, maintenance, NETZSCH ,SEEPEX, and MONO Universal Spare parts, repairs 

2. Does Ronice supply custom-made pumps ? 
Yes, this is our specialty, we customize different design and material combinations for each application's modular system. This means that we develop the best technology and the most economical solution for your needs.

3. Can Ronice spare parts be ordered online ?
Yes, Ronice screw pumps and spare parts as well as other brands (NETZSCH,SEEPEX.MONO) Universal accessories can be ordered online. For order please contact us.

4. How fast can my Ronice pump be delivered ?
Normally, standard pumps are delivered in 4 to 6 weeks. Emergency within seven days may be possible. Please contact us .

5.Product quality guarantee  
(1) According to the international standard, whole pump 1 year warranty,
(2) Spare parts 6 months warranty

Buyers Attention:
1.Can screw pump dry running ?
No, the conveying elements are permanently in contact with one another, which means that dry running must be avoided in progressive cavity pumps. The Ronice  dry-running protection device offers reliable protection.

2.Our services
1 Our screw pump series products, reasonable price, quality service, provide quality inspection. Welcome to sample Custom-made.
2 we have a special quality Supervision Department to ensure the quality of mass production.
3 If the product has quality problems, we will deal with the first time, find out the cause, take responsibility.

4 If you are interested in our products and companies, please leave a message or email us, we will give you an answer within 24 hours

3.Why choose us?
1. Factory Direct Sales, no intermediate links, competitive price
2.  The original machine factory, the production of stable product quality, do not use low quality equipment.
3. Ensure ontime delivery, procurement, we can provide the best quality of service control, transportation, documentation and so on.
4. We provide samples and OEM services.
5. We will reply to your enquiry within 24 hours.
6.  professional team, so that our customers feel relaxed and comfortable working with us in
7. Please contact us by email and we will send you more pictures for more choices of our products.

4.How to make an order for Ronice screw pump ? 
(1) After understanding the specific parameters, the model was determined 
(2) Client arrange 30% deposit after receiving our PI(proforma invoice), 
(3) We start bulk production and finish production within agreed lead time
(4) We send shipping documents to client
(5) Client arrange balance payment
(6)We arrange shipment , and send original documents or telex release the goods